Don’t worry, it happens to all spa owners at one time or another; water is among nature’s most erosive substances. Moisture leaks in and becomes trapped between the external vinyl shell and the plastic wrapped foam cores. The warm, wet environment is perfect for mold and mildew and other types of foul-smelling stuff.
If moisture has actually permeated even more into the plastic wrapped foam core, the cover becomes waterlogged, which can quickly grow all sorts of dark and stinky slime, but likewise make the cover truly difficult to get rid of, and not as efficient at keeping the heat in the spa. Time for a better kind of swim spa cover.
Smelly Swim Spa Cover?!?
• Broken or harmed. Split foam cores, ripped or worn spots, torn joints. A spa cover that loses it’s arched roof line, to keep water draining off properly, will ultimately begin to puddle water, which is most likely time to buy a new swim spa cover! A spa cover with threadbare areas in the vinyl is likewise bad news, and although you can stave off the unavoidable with a duct tape repair work, the water will win, ultimately.
• Not Removed Regularly. Eliminate your spa cover weekly for 2 hours of airing out. A better cover can endure longer durations, but it’s a great routine to remove the cover and let it get some air on a weekly basis. If you can easily open the zipper to enable wetness to escape do so, but do not remove fragile foam panels unless absolutely required.
• Poorly Made. It’s simple to make a swim spa cover with tape and staples, however it won’t stop moisture very well. Even the very best foam filled covers with vacuum-wrapped and heat bonded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only real option is a swim spa cover uses air to insulate rather than foam.
• Bad Spa Water. If the spa water is not preserved frequently with sanitizer and filtering, or is not stunned typically enough, germs and algae can make the most of a congenial environment to flourish. Low pH, high chlorine or high ozone levels can likewise weaken the underside of your spa cover. Since the cover is so near the spa, it takes in the chemistry of the spa. Tidy, clear and sanitary water is the best environment to prevent stinky spa covers. (Sorry however this is just BS) The reality is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside spa covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roof, that can be worse than no roofing at all, if an overhanging eave drains water onto the spa cover. Tidy and condition a spa cover 2-4 times per year, so that it always looks excellent, and is secured from the elements. Once again, this truly isn’t really going to stop the mold and mildew from growing inside a foam cover. But it will help your spa dealer pay their bills.
Fix Your Hot Tub Cover!
• Remove to Safe Location: This primary step might appear apparent, but you require a great place to allow the cover to sit undisturbed from family pets, wild animals, and winds. It needs to be a warm location if possible, or a dry indoor location with low humidity can also be used.
• Deodorize & Disinfect: You may not have to do both, it’s best to be as mild as possible. Don’t use household cleaning products on your spa cover, odd chemicals can wind up in your spa water. Carefully tidy all outside surface areas with spa cover cleaner, and allow the panels to dry.
• Remove the Panels: Again, this ought to be avoided if possible, since the panels might end up being harmed during elimination or cleaning. But if you determine that there is something slimy inside, you can normally unzip and eliminate the panel for a cleansing inside and out.
How frequently does your spa dealer anticipate you to do all this? If your swim spa is safeguarded from a lot of sun and rain, two times annually. If it’s exposed it needs to be 3-4 times each year. Let that sink in a minute.
Much better Choice
The simplest remedy for a stinky swim spa cover is to simply buy a various kind of swim spa cover A smelly swim spa cover simply suggests that your cover is taking on moisture, and things are beginning to grow! Swim Spa Covers from SpaCap.com that doesn’t use foam however has actually sealed air chambers rather will prevent providing the mold and mildew a location to grow in the first place.