Why Your Swim Spa Cover Stinks!

Hey, no offense, however your Swim Spa Cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at one time or another; water is among nature’s most erosive compounds. Moisture leaks in and becomes trapped between the external vinyl shell and the cling wrap foam cores. The warm, damp environment is best for mold and mildew and other kinds of foul-smelling things.
If moisture has actually penetrated even more into the plastic wrapped foam core, the cover ends up being waterlogged, which can rapidly grow all sorts of dark and foul-smelling slime, however also make the cover really hard to get rid of, and not as efficient at keeping the heat in the spa. Time for a much better kind of Swim Spa Cover

Foul-smelling Swim Spa Cover?!?
• Broken or harmed. Split foam cores, ripped or used spots, torn seams. A Swim Spa Cover that loses it’s arched roofing system line, to keep water draining pipes off properly, will ultimately start to puddle water, which is probably time to buy a brand-new Swim Spa Cover! A Swim Spa Cover with threadbare areas in the vinyl is also problem, and although you can fend off the unavoidable with a duct tape repair work, the water will win, eventually.
• Not Removed Regularly. Remove your Swim Spa Cover weekly for 2 hours of airing out. A better Swim Spa Cover can hold up against longer periods, but it’s an excellent practice to remove the cover and let it get some air on a weekly basis. If you can quickly open the zipper to permit wetness to leave do so, however do not remove fragile foam panels unless definitely required.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s easy to make a Swim Spa Cover with tape and staples, however it will not stop moisture very well. Even the best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat welded joint are not going to keep the extreme wetness from your spa from reaching the foam core. The only genuine solution is a Swim Spa Cover uses air to insulate rather than foam.
• Bad Spa Water. If the spa water is not preserved regularly with sanitizer and filtering, or is not stunned typically enough, bacteria and algae can take advantage of a hospitable environment to grow. Low pH, high chlorine or high ozone levels can also degrade the underside of your Swim Spa Cover cover. Since the cover is so near to the spa, it soaks up the chemistry of the spa. Tidy, clear and sanitary water is the very best environment to prevent foul-smelling spa covers. (Sorry however this is just BS) The truth is the areas in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor Lightweight Swim Spa Covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roofing system, that can be even worse than no roofing at all, if an overhanging eave drains water onto the Swim Spa Cover Clean and condition a spa cover 2-4 times per year, so that it constantly looks fantastic, and is secured from the elements. Again, this actually isn’t going to stop the mold and mildew from growing inside a foam cover But it will help your spa dealer pay their costs. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.

Your Choices

Fix Your Swim Spa Cover!
• Remove to Safe Location: This initial step might appear apparent, however you require a good location to enable the cover to sit undisturbed from family pets, wild animals, and winds. It must be a bright place if possible, or a dry indoor location with low humidity can also be utilized.
• Deodorize & Disinfect: You may not need to do both, it’s finest to be as mild as possible. Don’t use home cleaning products on your Swim Spa Cover, strange chemicals can end up in your spa water. Gently tidy all exterior surfaces with spa cover cleaner, and allow the panels to dry.
• Remove the Panels: Again, this ought to be prevented if possible, due to the fact that the panels might become harmed throughout elimination or cleaning. However if you identify that there is something slimy within, you can usually unzip and eliminate the panel for a cleaning inside and out.

How frequently does your spa dealership expect you to do all this? If your swim spa is secured from most sun and rain, twice each year. If it’s exposed it needs to be 3-4 times annually. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster. 

Better Choice
The easiest treatment for a foul-smelling Swim Spa Cover is to simply buy a different kind of Swim Spa Cover A smelly swim spa cover simply indicates that your cover is taking on moisture, and things are beginning to grow! Lightweight Swim Spa Covers from SpaCap.com that does not use foam but has actually sealed air chambers rather will avoid providing the mold and mildew a place to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *